Any content that you create can be built to take advantage of these settings and is thus scaled appropriately. Scale-dependent objects in a drawing are scaled automatically upon insertion to reflect the units that are specified in a drawing. Likewise, if a drawing has a scale of 1:200 and a drawing unit of millimeters, then 200 millimeters in the drawing will be represented by one millimeter on the plotted out plan.Īnnotation plot size, multiplied by the scale factor, determines the height of plotted annotation text. A drawing scale of 1/8”=1’-0” (or 1:96 - eight eighths per inch times 12 inches per foot) in a drawing that has inches as default drawing units means that 8 feet in the drawing are represented by 1 inch on the plotted out plan. If I open the exported file in AutoCAD and tick Annotative parameter of the objects, and set the annotation scale of the objects to the ones used in Rhino, everything looks good again. The annotation scale determines how many drawing units in the drawing represent one inch (for imperial drawings) or one millimeter (for metric drawings) in the plotted drawing. In the properties tab, under the Text sub-menu, set the 'Annotative' entry to No. Select one annotative text instance and press Enter. Note: You cannot set the annotation scale used for this drawing here. In the bottom-right corner of the window, select the annotation scale that makes the text appear as desired.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |